Data Translation DT3130 Series, User Manual

Page: 144 / 160

Appendix C
128
Uninstalling the Device Driver
Generally, you will always require the DT3130 Series Device Driver.
However, if you are no longer using the DT3130 Series board with the
supported software, you can uninstall the DT3130 Series Device
Driver from the system by performing the following steps:
1. Open the Control Panel.
2. Double-click System .
3. Click Hardware , then click Device Manager .
4. Double-click DT Image Device .
5. Click the DT3130 Series Frame Grabber , click Action, then click
Uninstall .
6. Click OK .
7. Click DT3130 Series Secondary Device , click Action, then click
Uninstall .
8. Click OK.
9. Close the System dialog box.
10. From the Control Panel, click Add/Remove Programs .
11. Click DT3130 Series Drivers , then click Change/Remove .
12. Click Finish .
13. Click Close .
14. Turn your computer off and remove any DT3130 Series boards.
Note: If you want to reinstall the device driver after removing it,
refer to the DT3130 Series Getting Started Manual for instructions.