V1.0
18
2.5 Optimizing the Laminate Quality
To optimize the laminate quality, you can change the heating roller
temperature and laminating speed according to the type of the card, via
LCD panel or setup tool.
1
、
Setup the heating roller temperature
：
1
Change Normal Mode to User Mode (please refer to
Chapter 3.2).
2
Press
【▼】
key until the LCD displays
【
Laminate Parm
Setup
】
, and then press the right key.
3
Press
【▼】
key until the LCD displays
【
Heater Temp
】
.
Press the right key.
4
Press
【▼
/
▲】
key to change current temperature.
Summary of Contents for DC-5100
Page 1: ...User Manual DC 5100 Laminator ...
Page 22: ...V1 0 11 laminator on the left side is the rewind pole Put 2 spool covers back in place ...
Page 24: ...V1 0 13 2 2 Loading the Card Load the card through the slot one at a time ...
Page 26: ...V1 0 15 Parameter setting item Parameter list Parameter annotation ...
