V1.0
26
Laminate Type
：
The currently recognized Laminate
type.
Option: PATCH1 \ OVERLAY1
Interface Setup
Laminator ID
：
The device ID used to identify the
laminator.
(Range
：
0-15)
IP Type
：
Method of obtaining a Network Address.
Option
：
Static \ Dynamic
IP Address
：
The IP address of the laminator.
(Default
：
192.168.0.12)
Subnet Mask
：
The static subnet mask of the laminator.
(Default
：
255.255.255.0)
Gateway
：
The IP address of the static gateway of the
laminator.
(Default
：
192.168.0.1)
MAC Address
：
Physical MAC address of the laminator.
Timeout(s)
：
The maximum time that network waits for
the communication data.
Setting
Function
Mode 1
In standby mode, it can be set to enter
power save mode. The heating roller
temperature drops to about 100
℃
.
Mode 2
In standby mode, it can be set to enter
power save mode. The heating roller and
LCD backlight are turned off to save
energy.
Default is Mode 1. The laminator will enter Power Save
Mode 1 after 30 min in standby mode.
Summary of Contents for DC-5100
Page 1: ...User Manual DC 5100 Laminator ...
Page 22: ...V1 0 11 laminator on the left side is the rewind pole Put 2 spool covers back in place ...
Page 24: ...V1 0 13 2 2 Loading the Card Load the card through the slot one at a time ...
Page 26: ...V1 0 15 Parameter setting item Parameter list Parameter annotation ...
