V1.0
12
3
、①
Adjust the film according to the arrow direction as shown in below
figure, ensure the film passes through the guiding axis, heating module
and guiding roller without wrinkles.
②
Close the top cover.
4
、
Place RFID recognition tag that is attached to the film into the card slot
on the base (to identify whether the used film is genuine from Dascom),
and then push in the card slot.
Guiding roller
Heating module
Guiding axis
Summary of Contents for DC-5100
Page 1: ...User Manual DC 5100 Laminator ...
Page 22: ...V1 0 11 laminator on the left side is the rewind pole Put 2 spool covers back in place ...
Page 24: ...V1 0 13 2 2 Loading the Card Load the card through the slot one at a time ...
Page 26: ...V1 0 15 Parameter setting item Parameter list Parameter annotation ...
