Darwin Fitness DARWIN RM40, Assembly And Operating Instructions Manual

Page: 16 / 44

16
RB40
Step 4: Assembly of the computer
1. Connect the upper computer cable (38A) with the lower computer cable (38B). Now assemble
the handlebar post welding set (2) to the main frame (22), using a spring washer (74), one
curved washer (80), one flat washer (76) and one allen bolt (87) - see figure.
2. Connect the lower computer cable (I) (28), the lower computer cable (30) and the upper
computer cable (38A) with the corresponding cables of the computer (1) - see fig. Now assemble
the computer (1) to the handlebar post welding set (2), using four cross screws (92) - see figure.
Step 5: Connecting the equipment to the mains supply
࣑ ATTENTION
The equipment must not be connected to a multiple socket, otherwise it cannot be guaranteed
that the equipment will be supplied with sufficient power. Technical errors can result.
Connect the power plug (99) with the equipment and plug the power plug (99) into a wall outlet that
complies with the instructions in the chapter on electrical safety.