DARKROOM AUTOMATION F-STOP, Instruction Manual

Page: 17 / 26

Before deleting step 2: After deleting step 2:
1E2. 1E2.
2b1. 2b.5
3b.5
...
...
Jd1.
Kd1. K--
Insert a step by pressing the up arrow until the display shows
InS.
. Pressing the
menu key will insert a new step after the current step and the display will show a
blank step at the new location. The exposure at step 20 (shown as
K
) will fall off the
top of the memory bank and be lost.
Before inserting at step 2: After inserting at step 2:
1E2. 1E2.
2b1. 2--
...
3b1.
JL2.
...
Kb.5 KL2.
(lost)
Erasing a Memory Bank
Erase a memory bank pressing the up arrow to go to step 20
Kb.5
. Release the
up arrow and then hold it down for one second so the display shows
Er.n
-
‘Erase No’. Press the up arrow to change the display to
Er.Y
- ‘Erase Yes’ - and
then press the menu key -- the memory bank will be erased and the display will
show
1E2.
. To exit without erasing the bank press the down arrow so the display
shows
Er.n
and press the menu key -- the display will go back to showing step
20
Kb.5
and the contents of the memory bank will remain as they were.
Single Grade Exposures with Memory
A memorized single grade exposure sequence is made up of the following
elements. They must be in the order shown:
• Base exposure - Required
• Adjustments for paper speed and drydown - Optional
• One or more dodge exposures - Optional
• One or more burn / progressive burn exposures - Optional
• An ‘Again’ step to return to the base exposure - Optional
15