DAPAudio ZPA-6240TU, Manual

Page: 8 / 24

7
ZPA-6240TU
Ordercode: D6180
Frontside
Fig. 01
Zone 1-6 volume controls
Turn the controls to adjust volume level for zone 1-6 signals.
Zone 1-6 buttons
Press the Z1-Z6 buttons to activate/deactivate zone outputs.
Press the ALL button to activate output for all 6 zones at the same time, at maximum volume level.
VU meter
The clip LED indicates peak levels at the output of the amplifier. If the red LED frequently blinks or
lights continuously, the output is likely to enter clipping. If this happens, we strongly suggest turning
the
master volume control (15) to the left, to decrease the master volume.
Tuner/audio player
See section Audio Player, page 12.
Bass/treble controls
Turn the controls to adjust bass/treble level for inputs 1-6.
Input 1-6 volume level control
Turn the Remote 1 control to adjust the volume level for Mic 1 & PM-01.
Turn the Remote 2 control to adjust the volume level for Mic 2 & PM-06.
Turn the controls 3-6 to adjust the volume level for the inputs 3-6.
Chime button
Press the button to activate chime.
Chime level control
Turn the control to adjust chime level. In chime mode, all inputs except input 1 will be muted so that
it is possible to broadcast a message after the chime signal.