17
ZPA-6240TU
Ordercode: D6180
Updating Chime
01)
Set the
switch (39)
to CHI position.
02)
Connect the
USB connector (40)
to the USB connector on your PC to the device, by means of a USB
cable.
03)
In Computer section on your PC, enter the removable disk.
04)
Overwrite
Chime.mp3
file with the new one.
Updating Messages
01)
Set the
switch (39)
to MSG position.
02)
Connect the
USB connector (40)
to the USB connector on your PC to the device, by means of a USB
cable.
03)
In Computer section on your PC, enter the removable disk.
04)
Overwrite the desired
MSG_XXX.mp3
file with the new one.
Connecting Outputs
Speakers are connected by means of terminal connectors. See the examples below.
Low Impedance Outputs
You can use as many speakers as you want as long as the total impedance matches the amplifiers
output.
Example 1: Using the 4
Ω
output with a 4
Ω
speaker.
Fig. 06
Example 2: Using the 4
Ω
output with two 8
Ω
speakers.
Fig. 07
In a low impedance system, the total speaker load should always match the amplifier’s
impedance, in order not to overload the amplifier. The total speaker power should be at
least equal to the power of the amplifier, to avoid speaker damage.
High Impedance Outputs
While using either the 70V outputs or the 100V outputs, note that all speakers
should be wired in parallel
.
The total power of all speakers summed together should never exceed the total power of
the amplifier in a 70V or a 100V system!
Summary of Contents for ZPA-6240TU
Page 21: ...20 ZPA 6240TU Ordercode D6180 Dimensions ...
Page 22: ...21 ZPA 6240TU Ordercode D6180 Notes ...
Page 23: ...22 ZPA 6240TU Ordercode D6180 ...
Page 24: ... 2016 DAP Audio ...
