DAPAudio ZPA-6240TU, Manual

Page: 14 / 24

13
ZPA-6240TU
Ordercode: D6180
Fig. 05
Play/pause/M1 button
In USB/SD player mode, press the button to start/pause playback.
In Tuner mode, press the button to recall preset # 1.
Record button
Press the button to record signal. Before recording, please select your signal input.
SD card slot
Insert an SD card, containing MP3 files.
USB connector A
Insert a USB flash drive, containing MP3 files.
Installation
Remove all packing materials from the ZPA-6240TU. Check if all foam and plastic padding is removed.
Secure the equipment into a 19" rack if preferred. Connect all cables.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 115V specification product on 230V power, or vice versa.
Before powering up the first time, make sure that the AC selector is set to the proper
voltage!
Damage caused by connecting the amplifier to improper AC voltage is not covered
by any warranty!
Always turn off and disconnect the amplifier from mains voltage before making audio
connections. The attenuators should always be turned down during power-up.