DAPAudio ZPA-6240TU Manual Download Page 13 | Manualshive

Page: 13 / 24

background image

12

ZPA-6240TU

Ordercode: D6180

Audio Player

Fig. 04

LCD display

button

Press the button to skip backwards.

button

Press the button to skip forwards.

button

Press the button to increase volume. The adjustment range is between 0-31, from OFF to loud.

In Priority Settings, press the button to set the input priority.

Volume - button

Press the button to decrease volume. The adjustment range is between 0-31, from OFF to loud.

In Priority Settings, press the button to set the input priority.

Mode button

Press the button to toggle between the 2 modes: Tuner mode and USB/SD player mode.

Stop/M4 button

In USB/SD player mode, press the button to stop playback.

In Tuner mode, press the button to recall preset # 4.

SD/USB/M3 button

In USB/SD player mode, press the button to toggle between the 2 source devices: USB and SD.

In Tuner mode, press the button to recall preset # 3.

Repeat/M2 button

In USB/SD player mode, press the button to toggle between the available repeat modes.

In Tuner mode, press the button to recall preset # 2.

«
...
11
12
13
14
15
...
»

Summary of Contents for ZPA-6240TU

























Reviews:

No comments

Related manuals for ZPA-6240TU

trans-nova 9505

Brand: Hafler Pages: 24

Brand: Hafler Pages: 9

Brand: Hafler Pages: 7

Brand: Hafler Pages: 21

Brand: Hafler Pages: 2

Brand: Viking Pages: 4

Brand: DaytonAudio Pages: 2

Brand: LD Pages: 28

Brand: Jedia Pages: 16

Pro-Ject Tube Box SE

Brand: Pro-Ject Audio Systems Pages: 3

Brand: Eclipse TD Pages: 10

Brand: W Audio Pages: 11

Brand: Parasound Pages: 16

Claymount AmpMC 3-field Series

Brand: Varex Imaging Pages: 24

Brand: B2 Audio Pages: 12

Brand: Harman Kardon Pages: 20

Brand: FAME Pages: 8

Brand: Extron electronics Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands