DAPAudio ZPA-6240TU, Manual

Page: 11 / 24

10
ZPA-6240TU
Ordercode: D6180
Line 6 connector – RCA IN
Connect an auxiliary signal source.
Line 5 connector – RCA IN
Connect an auxiliary signal source.
Line 1 – combo IN
Connect balanced or unbalanced inputs.
Gain control
If set to LINE, the input sensitivity will be set for line inputs. If set to MIC, the input sensitivity will be set
for microphone level.
Phantom power switch
Press the button to provide 24V power to condenser microphones.
75Ω FM antenna connector
Connect your FM antenna to this connector.
DC 24V terminal connector – OUT
Connect low-voltage backup equipment.
Cooling fan
Do not obstruct the air inlet.
PM-One connector – RJ45 IN
Connect up to 3 PM-One sets. Press the Phantom Power switch for Mic 1.
NOTE : Use cables no longer than 10 meters . Otherwise, you risk signal deterioration.
PM-Six connector – RJ45 IN
Connect up to 3 PM-Six sets.
NOTE : Use cables no longer than 10 meters . Otherwise, you risk signal deterioration.
PM-Six connector – RJ45 LINK
Connect to another amplifier, for advanced use.
Update section selector
Insert a USB flash drive, containing updates. Set the selector to the section which you would like to
update.
Set the selector to CHI, if you want to update the chime sound.
Set the selector to MSG if you want to update the digital message of the host.
Set the selector to PROG, if you want to update the software and audio priority setting.