41
DCP-24 MKII Digital Cross Over
Product code: D2083
You can set the delay of the output channels 1–4 (or 1–6 when using DCP-26 MKII).
To decrease/increase gain, perform one of the 2 actions:
●
Click-and-drag the control.
●
Type a value manually in the field below the control.
The adjustment range is 0–8 ms.
You can set the limiter.
To set the threshold (THR) and release (REL) values, perform one of the 2 actions:
●
Click-and-drag the controls.
●
Type a value manually in the field below the corresponding control.
The adjustment range of the threshold is from -48 dB to +12 dB.
The adjustment range of the release is 1–100 ms.
Note:
Enabling the limiter on a channel changes the way in which the level is displayed
on the corresponding output LED indicator (06). The displayed level is no longer the
“absolute” value, but the level of the signal at -24 dB, -12 dB, -6 dB or -3dB
(compared to the threshold of the limiter), regardless of the threshold value.
You can set the parametric equalizers.
Type values manually in the frequency (FREQ), the quality
factor (Q) and GAIN fields.
●
The adjustment range of the frequency is 20–20000 Hz.
●
The adjustment range of the quality factor is 0,2–25.
●
The adjustment range of gain is from -12 dB to +12 dB.
Select one of the 8 filter types:
●
BELL
●
NOTCH
●
HIGH SHELF
●
LOW SHELF
●
ALLPASS
●
BAND PASS
●
HIGH PASS
●
LOW PASS
Click on the ON button to activate the filter. The button lights
up red.
