11
DCP-24 MKII Digital Cross Over
Product code: D2083
4.
Installation
Safety Instructions for Installation
Attention
Make sure there is enough space for ventilation around the device.
Do not install near equipment that produces heat, for example amplifiers.
Installation Site Requirements
●
The device must be installed only indoors.
●
The device can be placed on a flat surface or mounted in a standard 19-inch rack.
●
The maximum ambient temperature t
a
= 40 °C must never be exceeded.
●
The relative humidity must not exceed 50 % with an ambient temperature of 40 °C.
Rack Mounting
The device can be mounted in a standard 19-inch rack. The device requires 1 rack unit (U) of space,
which is 44,5 mm high. Make sure that the rack is sufficiently secured to prevent it from becoming
unstable or falling over.
To mount the device in a two-post rack, follow the steps below:
01)
Insert 4 cage nuts in the openings on the rack posts where you want to mount the device.
02)
Position the device in front of the rack posts so that the 4 x mounting openings (11) on the flanges
face the openings on the rack posts with cage nuts.
03)
Using a screwdriver, mount the device to the rack posts with 4 screws.
