36
DCP-24 MKII Digital Cross Over
Product code: D2083
Channel Control Panel
The channel control panel consists of the:
●
main panel
See 7.2.2.1. Main Panel
●
input panels
See 7.2.2.2. In A/In B Panels
●
output panels
See 7.2.2.3. Out 1–4/1–6 Panels
Main Panel
The main panel gives you a quick overview of the settings of all available input and output channels. You
can view and adjust the basic settings of all available input and output channels.
LOCAL
In this section you can save and load software settings.
●
Click on the STORE button to save software settings on your PC or Mac.
●
Click on the LOAD button to load software settings from your PC or Mac.
UNIT
In this section you can save and load software settings in the memory of the
speaker.
To save a software settings preset:
01)
Name the preset.
02)
Select an empty preset slot (1–50).
03)
Click on the STORE button to save the current software settings on the
speaker.
To load a software settings preset from the speaker, click on the LOAD button.
LINK
If more than one device is connected, click on the green box and select a
device for editing.
UNIT NAME
In this section you can view the name of the device that you are editing.
There are 2 sliders for adjustment of gain of the input channels (A–B). There are
4 sliders (DCP-24 MKII) or 6 sliders (DCP-26 MKII) for adjustment of gain of the
output channels.
To decrease/increase gain, perform one of the 2 actions:
●
Move the slider up/down.
●
Type a value manually in the field below a slider.
The adjustment range is from -48 dB to +12 dB.
Each channel has its own VU meter, displaying the current signal level.
