35
DCP-24 MKII Digital Cross Over
Product code: D2083
To select the output limiter unit, follow the steps below:
01)
Go to the EDIT tab and click on OUTPUT LIMITER UNIT.
02)
Select one of the following options:
Hardware Tab
In the HARDWARE tab you can adjust the access settings. You can lock speakers, set the PIN code and
adjust access levels.
The available options are:
●
ENTER PASSWORD:
Insert the password
●
CONFIGURE:
In this submenu you can select:
●
CHANGE PASSWORD: You can change the password
●
POWER ON PRESET: You can select a preset that will be loaded on start-
up
●
GLOBAL ACCESS RIGHTS: You can decide which parts of the software
should remain accessible when a speaker is locked
●
LOCK UNIT:
Lock the speaker. You can unlock it only with a correct password.
●
SET PIN:
Select a new PIN code
●
FIRMWARE UPDATE:
No function
●
STATUS DETAILS:
You can see whether there are any errors in the network.
Help Tab
In the HELP tab you can view the information about the DCP-24MKII and about the DSPControl software.
