22
DCP-24 MKII Digital Cross Over
Product code: D2083
Channel Setup
To adjust the settings of the input and output channels, follow the steps below:
01)
Press the exit button (07) to quit the main menu. The display shows the start screen:
02)
Press the channel up/down buttons (03/04) to select the channel. The display shows:
Note:
Different routings have different sets of channels with different settings.
Routing Channels Gain
Low-
pass
filter
High-
pass
filter
PEQ
1–5
Compressor Limiter Link Mixer Delay Phase
STEREO
1-WAY
In AB
x
x
x
x
x
x
x
Out 12
x
x
x
x
x
x
x
x
x
Out 34
x
x
x
x
x
x
x
x
x
STEREO
2-WAY
In AB
x
x
x
x
x
x
x
Out 12
x
x
x
x
x
x
x
x
x
Out 34
x
x
x
x
x
x
x
x
x
MONO
4-WAY
In A
x
x
x
x
x
x
x
In B
x
x
x
x
x
x
x
Out 1
x
x
x
x
x
x
x
x
x
x
Out 2
x
x
x
x
x
x
x
x
x
x
Out 3
x
x
x
x
x
x
x
x
x
x
Out 4
x
x
x
x
x
x
x
x
x
x
03)
Press the item up/down buttons (02/05) to select one of the following settings:
●
GAIN
see 6.3.1. Gain
●
LOWPASS
see 6.3.2. Low-pass Filter
●
HIGHPASS
see 6.3.3. High-pass Filter
●
PEQ 1–5
see 6.3.4. PEQ (Parametric Equalizer)
●
COMPR.
see 6.3.5. Compressor
●
LIMITER
see 6.3.6. Limiter
●
LINK
see 6.3.7. Link
●
MIXER
see 6.3.8. Mixer
●
DELAY
see 6.3.9. Delay
●
PHASE
see 6.3.10. Phase
Gain
In this menu, you can set gain.
Turn the jog wheel (09) to the left/right to decrease/increase the value.
The adjustment range is from -47,75 dB to +12 dB and MUTE.
