26
DCP-24 MKII Digital Cross Over
Product code: D2083
Limiter
In this menu you can set the limiter.
01)
Turn the jog wheel (09) to the left/right to decrease/increase the threshold value. The adjustment
range is from -48 dBu to 24 dBu.
02)
Press the jog wheel (09) to open the release settings. The display shows:
03)
Turn the jog wheel (09) to the left/right to decrease/increase the value. The adjustment range is
10– 100.
Note:
Enabling the limiter on a channel changes the way in which the level is displayed on the corresponding
output LED indicator (06). The displayed level is no longer the “absolute” value, but the level of the signal
at -24 dB, -12 dB, -6 dB or -3dB (compared to the threshold of the limiter), regardless of the threshold
value.
Link
In this menu you can link/unlink channels.
Turn the jog wheel (09) to the left/right to select OFF/ON. The display shows:
Note:
This option is fully functional only when STEREO 1-WAY or STEREO 2-WAY routing is selected. See 6.2.1.
Routing on page 18, for more information.
Mixer
In this menu you can set the mixer. This menu is available only when an output channel is selected.
01)
Turn the jog wheel (09) to the left/right to decrease/increase the mix volume of the input A.
The adjustment range is OFF, from -47,75 dB to 0 dB.
02)
Press the jog wheel (09) to open the mix volume settings of the input B.
03)
Repeat step 1 to set the mix volume of the input B.
