14
Rear
Fig. 13
44. Power switch
Do not supply power before the whole system is set up and connected properly.
45. Stereo/mono switch
When set to mono, the master output becomes a monaural combination of L+R.
46. Master RCA unbalanced out
Use these outputs to connect an amplifier with unbalanced inputs.
47. Booth RCA unbalanced out
Use these outputs to connect an amplifier with unbalanced inputs.
48. Record RCA unbalanced out
Use these to connect a recording device
.
49. Channel 3 line RCA input
Use to connect a line level device.
50. Channel 3 phono RCA input
Use to connect a turntable.
51. Channel 3 CD RCA input
Use to connect a CD player.
52. Channel 2 line RCA input
Use to connect a line level device.
53. Channel 2 CD RCA input
Use to connect a CD player.
54. Channel 1 line RCA input
Use to connect a line level device.
55. Channel 1 CD RCA input
Use to connect CD player.
56.
AC inlet with integrated fuse holder
This connector is meant for the connection of the supplied main cord. Connect one end of the power
cord to the connector, the other end to the mains, then turn on the power switch to operate the unit.
Note:
Please make sure that the supply voltage matches the operation voltage before connecting the
unit to mains.
Replace the fuse only with a fuse of same specification (T1A).
Summary of Contents for Core Mix-3 USB
Page 22: ......
