DAPAudio Core Mix-3 USB, Product Manual

Page: 14 / 22

13
Record Module
33.
EQ button
Pushing the EQ button allows you to select a preset EQ curve. You can
choose between: None - Pop – Rock – Bass – Jazz – Classic.
34. USB slot
Slot for inserting an USB stick.
35.
SD card slot
Slot for inserting a SD/MMC card. The contacts of the card must point
downwards.
36. Display
Fig. 12
37.
Repeat button
Tap the repeat button to select between: repeat single track , repeat USB- stick/SD- card or repeat off .
38. Stop button
Push the stop button to stop playback/recording.
39. Play/Pause button
Use this button to start playback. Press once to start playback, twice to set the pause mode, and again
to resume playback.
40.
/ button
Tapping this button allows you to skip to the next track.
Pushing and holding this button allows you to play a track fast forward.
41. / button
Tap this button to go back to the beginning of the current track or select a previous track for playing.
Pushing and holding this button allows you to play a track fast backwards.
42.
Delete button
Push the delete button during playback. In the display appears: “ Del One ?”. Pushing the delete button
again will delete the current track. “ Success” will appear in the display.
43.
Record button
Pushing this button will start recording the master mix independent of the Master (25) control.
Note:
depending on the USB stick/ SD card you use, it can take a couple of seconds before the actual
recording will start.