17
Replacing the crossfader
1. Remove the four screws indicated by the solid line circles.
2. Gently remove the fader and disconnect the connector.
3. Re-attach the connector to the new fader and place the fader back gently.
4. Replace the fader cover and fix the screws.
Using the Core Mix-3 USB with PC software which can only access a single
soundcard
If the PC software you plan on using with the two
USB1 (68)
and
USB2 (66)
ports
can only be set up with a
single soundcard, You need to install the freeware ASIO4ALL software which can be downloaded from
After installing the ASIO4ALL software, make sure the settings are the same as in figure 15.
Fig. 15
If you own a Mac, you can use the Audio Midi setup for this purpose.
Fig. 16
Summary of Contents for Core Mix-3 USB
Page 22: ......
