P
AGE
14
46517-92-1098 <90-00085>
P
OLLING
AND
P
OINTS
This option lets you configure GPP polling list entries and their
alarm points. Below is the NEC Polling List screen:
To configure a polling list:
1.
In the TME field, type in the TME address. Acceptable values are
1-16.
Here are brief descriptions of the command keys that you can
use while the cursor is in the TME field:
F2 - TRE Disp - Sets TRE definitions and alarm points. Refer
to TRE Display and Alarm Point Configuration on
the next page.
F3 - Blank - Deletes the current entry.
F5 - Compress - Removes all unreferenced entries from SID,
AID and COND tables.
NOTE:
Compression time depends on the number of defined points in
your database.
2.
Press Enter.
3.
In the SID field, type in the source identification number. Do not
exceed 20 characters.
Here are brief descriptions of the command keys that you can
use while the cursor is in the SID field:
Alt-F9 - Show Table - Lists all defined SIDs.
Up Arrow - Previous Field - Returns to entry TME field.
NEC GPP SYSTEM DEFINITION
CONTINUED
. . .
