46517-92-1098 <90-00085>
P
AGE
17
5.
The following question appears at the bottom left corner of the
screen:
Entry not found. Add it? (Y/N)
Type Y to add the address. If you type N, the screen prompts you
for another address.
6.
In the EQT field, type in the EQT attribute. Do not exceed 8 char-
acters.
7.
Press Enter.
8.
The following question appears at the bottom left corner of the
screen:
Entry not found. Add it? (Y/N)
Type Y to add the address. If you type N, the screen prompts you
for another address.
9.
In the COND field, type in the COND attribute. Do not exceed
15 characters.
10.
Press Enter.
11.
The following question appears at the bottom left corner of the
screen:
Entry not found. Add it? (Y/N)
Type Y to add the address. If you type N, the screen prompts you
for another address.
12.
Type in the LEV attribute. Press Alt-F9 for a list of attributes. You
can type in the attribute or the forward slash key and the LEV code
in the attribute list; for example, type /1 for MJ. The default is NA.
13.
Press Enter.
14.
Type in the DIRN attribute. Press Alt-F9 for a list of attributes.
You can type in the attribute or the forward slash key and the
DIRN code in the attribute list; for example, type /1 for ZA. The
default is AZ.
15.
Press Enter.
16.
Type in the LOCN attribute. Press Alt-F9 for a list of attributes.
You can type in the attribute or the forward slash key and the
LOCN code in the attribute list; for example, type /1 for FEND.
The default is NEND.
17.
Press Enter.
18.
Type in the EFF attribute. Press Alt-F9 for a list of attributes. You
can type in the attribute or the forward slash key and the EFF code
in the attribute list; for example, type /1 for NSA. The default is
SA.
19.
Press Enter.
20.
Repeat steps 1-19 to configure other alarm points.
21.
When you finish, press F8 to save the information. Procedure com-
plete.
NEC GPP SYSTEM DEFINITION
