P
AGE
20
46517-92-1098 <90-00085>
Alt-F6 - Block Copy - When you press Alt-F6, the Block Copy
window pops up:
To copy a block:
1.
Type in the first point of the block. Acceptable values are 1-64.
2.
Press Enter.
3.
Type in the last point of the block. Acceptable values are 1-64.
4.
Press Enter.
5.
Enter the first point of the new block location. Acceptable values
are 1-64.
NOTE:
The selected destination block must accommodate the entire
source block. For example, a block from points 1-10 cannot be
moved to a block starting at point 60, because the maximum
block is 64.
6.
Press Enter.
Alt-F7 - Previous Entry - Goes to previous entry in the
selected field.
Alt-F8 - Next Entry - Goes to next entry in the selected field.
Alt-F9 - Show - Displays a list of all entries you made in the
selected field.
F10/Esc - Exit - Returns to the TRE Display screen.
NOTE:
When you press F10/Esc, the alarm point configuration is not
saved. Press F8 to save the information.
7.
Procedure complete.
NEC GPP SYSTEM DEFINITION
