P
AGE
42
46517-92-1098 <90-00085>
F
INISH
Use the Finish options to save changes to the terminal configu-
ration. There are two options:
♦
A file can be created that replaces the default settings with
new default settings. The default settings are those the com-
puter uses for the terminal configuration whenever the Ter-
minal Emulator is entered from the Master Menu. The initial
default settings are listed under Terminal Attributes in
this section.
♦
A file can be created that can be used later but does not
change the default settings.
To create a file that
does change the default settings:
1.
Make the changes as described under Terminal Attributes in this
section.
2.
Make the changes as described under Shift Fxx, Ctrl Fxx, and
Alt Fxx in this section.
3.
Type F when you are in the Edit Configuration window.
4.
Type the file name TERM.
5.
Press Enter.
The new settings are now the defaults for the terminal configu-
ration whenever the Terminal Emulator is entered from the
Master Menu.
To create a file that
does not change the default settings:
1.
Make the changes as described under Terminal Attributes in
this section.
2.
Make the changes as described under Shift Fxx, Ctrl Fxx, and
Alt Fxx in this section.
3.
Type F when you are in the Edit Configuration window.
4.
Type a valid DOS file name without an extension. The extension
.CNF is automatically appended to the name.
5.
Press Enter.
Whenever the Terminal Emulator is entered from the Master
Menu, the initial default settings are still used for the terminal
configuration. To change the default settings using the file that
you just created:
1.
Press F5 (Ld Cnf) from the main terminal emulator screen.
2.
Enter the name of the file.
3.
Press Enter.
The settings in the file are now the defaults. They remain active
until you change the settings, load a different terminal configu-
ration file, or exit the program to the Master Menu.
TERMINAL EMULATOR
