Dante Inovonics 552 Installation & User Manual Download Page 40

Page: 40 / 60

— 36 —

Image Error

Reporting

552 diagnostics alert you to an image that does not meet the

HD Radio spec. These are images that may not display proper-

ly on radio faceplates. Just hover over the image to bring up

the

Image Issue(s):

info box.

You may click on

the first yellow

URL link in the box

to be taken to an

industry Website.

There you can up-

load the off-air im-

age for an instant

evaluation and ex-

planation of the

problem. In this

particular case,

characters in the image filename did not match the station’s HD

‘short name.’
The other two yellow links

bring up technical particulars

relating to the specifications

for both the station Logo and

Artist Experience images. This

self-help Website will also

direct you to independent

sources for assistance in for-

matting HD Radio images

properly.
The Listener Experience dis-

play for other HD Radio chan-

nels this station carries will be

presented in like manner. Re-

member that any transmitted

HD channel must be selected at the top of the page before it

will be presented.

Additional

Image Data

Additional information on Listener Experience

Image Data

cur-

rently being received, including time received, time triggered

and packet size, may be found under the

Programs

heading on

the

HD Info

Webpage.

RDS AND HD METADATA

RDS Info

This 552 Webpage presents a comprehensive display of the

RDS information that accompanies analog-FM transmissions.

The upper area of the screen shows the most important blocks

of RDS data. These include the static or scrolling

; the

Code

, either assigned or, in the US and Canada, derived from

the

Callsign

;

RadioText

and its interactive

RT+1

and

RT+2

deriva-

Summary of Contents for Inovonics 552





























































Search results

Summary of Contents for Inovonics 552

Reviews:

Dante Inovonics 552, Installation & User Manual, Page: 40 / 60

Search results

Summary of Contents for Inovonics 552

Reviews: