Dante Inovonics 552, Installation & User Manual, Page: 37 / 60

— 33 —
The lower graph plots
HD audio
Peak:
and
Loudness: against time,
normalized to analog-
FM audio parameters.
Select which mea-
surements to
Show:
;
set
Delay Units
and
Time
Span: here too.
THE BANDSCANNER™ UTILITY
The 552 BandScanner is an annotated RF spectrum analyzer
utility that is able to graphically display the entire FM band.
Warnings!
1) Band-scanning interrupts all mod-monitor functionality dur-
ing the scan cycle, as it essentially tunes across the band
and collects data from each station in the market. Program
audio outputs are muted, and of course scanning will tem-
porarily interrupt all history studies.
2) Once the display is presented, clicking on a bar will imme-
diately tune the 552 to that station, which you may, or may
not, want to do.
Shown above is an entire FM-band plot of the busy Los Angeles
FM market. Three Scan Type: modes may be selected at the bot-
tom of the screen. The 552 can scan the band and display only
the RSSI level; this is the quickest scan. It can also scan and
display both the RSSI + RDS information, which takes a bit