Dante DLW5600 Installation And Operation Manual Download Page 62

Page: 62 / 114

Digital Video Recorder User Manual

Fig 4.11 Motion Configuration

Here users can set motion sensitivity, detection area, and alarm out. The following are the definitions of every option.

Enable:

enable motion detection.

Trigger:

setup similar with that of sensor alarm. Nevertheless, linked speed domes must be different front current channel.

I.e. now users enable motion detection of camera 1, the linked speed domes must be camera 2-8.

Area:

set sensitivity and motion detection area. It supports multi detection area as Fig 4.12 Detection Area Configuration.

Click the blocks or drag mouse to enable or disable. Red means unchecked, transparence means available. Click

Save

save and exit.

Summary of Contents for DLW5600



















































































































Search results

Summary of Contents for DLW5600

Reviews:

Related manuals for DLW5600

Brands by name

Popular brands

Dante DLW5600, Installation And Operation Manual

Search results

Summary of Contents for DLW5600

Reviews:

Related manuals for DLW5600

Brands by name

Popular brands