Dante DLW5600 Installation And Operation Manual Download Page 76

Page: 76 / 114

Digital Video Recorder User Manual

STEP5

The operating is similar with searching events log.

Notice: The log files saved to the HDD inside. If HDD not installed, it will not record any thing.

The number of log files is unlimited.

5.6 Check On-line Network Users

Press right mouse to show the control bar. Click Menu---->Online users. It will show the details of the current connections
as below.

Fig 5.8 Details of Current Network Connections

5.7 Lock &Delete Files

Users can control every video file, locking and deleting them. Once users lock an important file, it cannot be covered or

deleted. However, the locked files can clear by formatting.

STEP1

Press right mouse to show the control bar. Click Menu, referring to Fig 4.2 Up-listed Menu.

STEP2

Click Search----->File manager, the window below will appear.

Summary of Contents for DLW5600



















































































































Search results

Summary of Contents for DLW5600

Reviews:

Related manuals for DLW5600

Brands by name

Popular brands

Dante DLW5600, Installation And Operation Manual

Search results

Summary of Contents for DLW5600

Reviews:

Related manuals for DLW5600

Brands by name

Popular brands