![background image](http://html1.mh-extra.com/html/danfoss/vlt-series/vlt-series_design-manual_3462515093.webp)
5.2.8. Access to Control Terminals
All terminals to the control cables are located underneath the terminal cover on the front of the
frequency converter. Remove the terminal cover by means of a screwdriver (see illustration).
Illustration 5.12: A1, A2 and A3 enclosures
Illustration 5.13: A5, B1, B2, C1 and C2 enclosures
5.2.9. Control Terminals
Drawing reference numbers:
1.
10 pole plug digital I/O.
2.
3 pole plug RS485 Bus.
3.
6 pole analog I/O.
4.
USB Connection.
Illustration 5.14: Control terminals (all enclosures)
VLT
®
HVAC Drive Design Guide
5. How to Install
MG.11.B2.02 - VLT
®
is a registered Danfoss trademark
93
5