Danfoss VLT OneGearDrive, Instruction Manual

Page: 4 / 40

4.6 Overload Protection
16
5 Commissioning
17
5.1 Measures before Commissioning
17
5.1.1 Overview 17
5.1.2 Motor Component 17
5.1.3 Gear Unit Component 17
5.2 Commissioning Procedure
17
6 Maintenance, Diagnostics and Troubleshooting
18
6.1 Maintenance
18
6.1.1 Replacing the Brake and Rotor 18
6.1.2 Adjusting the Nominal Brake Torque and Replacing the Springs 19
6.2 Inspection during Operation
20
6.3 Repair
20
6.4 Oil
20
6.4.1 Oil Changes 20
6.4.2 Oil Grade 21
6.4.3 Oil Volume 22
6.4.4 Changing the Oil 22
6.5 Spare Parts 22
7 Decommissioning and Disposal
23
7.1 Dismounting 23
7.2 Product Returns 23
8 Motor Datasheet
24
8.1 Nameplate
24
8.2 Storage 24
8.2.1 Measures during Storage 24
8.2.2 Measures after Storage 24
8.3 Permanent Magnet 3-phase Synchronous Motor 24
8.4 General Specifications and Environmental Conditions 25
8.5 Dimensions 25
8.5.1 OneGearDrive Standard 25
8.5.2 OneGearDrive Standard with Torque Arm in Front Position (optional) 26
8.5.3 OneGearDrive Hygienic 27
8.5.4 OneGearDrive Hygienic with Torque Arm in Front Position (optional) 28
8.6 Options 29
8.6.1 Torque Arm Set 29
Contents Instruction Manual
Danfoss A/S © 08/2014 All rights reserved. MG75C422