VLT
®
FCM Series
Installation
X101: Terminal block for analogue/digital control signals
Terminal No.
Function
Example
1
Analogue input (0-20 mA)
Feedback signal
2
Analogue (0-10 V)/digital input 2
Speed reference
3
Digital input (or pulse) 3
Reset
4
Digital input (or precise stop) 4
Start
5
Digital input (other) 5
Jog (fixed speed)
6
24 V DC supply for digital inputs (max. 150 mA)
7
10 V DC supply for potentiometer (max. 15 mA)
8
0 V for terminals 1-7 and 9
9
Analogue (0-20 mA)/digital output
Fault indication
Connection diagram - factory setting
-
Reset
to be closed short time for resetting fault trips
-
Start
to be closed for changing to
run mode
-
Jog
will run at fixed speed while closed (10 Hz)
-
Speed reference
(0-10 V) determines speed
while in
run mode
X102: Terminal block for relay output
Terminal No.
Function
1-2
Make (normally open)
1-3
Brake (normally closed)
See parameter 323 (relay output) for programming
of relay output.
X100: Terminal block for data communication
Terminal No.
Function
1
P RS 485
2
N RS 485
for connection
to bus or PC
3
5 V DC
4
0 V DC
Supply for RS
485 bus
LED 300-304
LED 300 (red): Fault trip
LED 301 (yellow): Warning
LED 302 (green): Power on
LED 303-304: Communication
For PROFIBUS versions please refer to the
manual MG.90.AX.YY.
MG.03.H3.02 - VLT is a registered Danfoss trademark
13