Danfoss vlt fcd 302, Operating Manual, Page: 55 / 84

9-52 Fault Situation Counter 0 N/A All set-ups TRUE 0 Uint16
9-53 Profibus Warning Word 0 N/A All set-ups TRUE 0 V2
9-63 Actual Baud Rate
[255] No baudrate
found All set-ups TRUE – Uint8
9-64 Device Identification 0 N/A All set-ups TRUE 0 Uint16
9-65 Profile Number 0 N/A All set-ups TRUE 0 OctStr[2]
9-67 Control Word 1 0 N/A All set-ups TRUE 0 V2
9-68 Status Word 1 0 N/A All set-ups TRUE 0 V2
9-70 Edit Set-up [1] Set-up 1 All set-ups TRUE – Uint8
9-71 Profibus Save Data Values [0] Off All set-ups TRUE – Uint8
9-72 ProfibusDriveReset [0] No action 1 set-up FALSE – Uint8
9-75 DO Identification 0 N/A All set-ups TRUE 0 Uint16
9-80 Defined Parameters (1) 0 N/A All set-ups FALSE 0 Uint16
9-81 Defined Parameters (2) 0 N/A All set-ups FALSE 0 Uint16
9-82 Defined Parameters (3) 0 N/A All set-ups FALSE 0 Uint16
9-83 Defined Parameters (4) 0 N/A All set-ups FALSE 0 Uint16
9-84 Defined Parameters (5) 0 N/A All set-ups FALSE 0 Uint16
9-85 Defined Parameters (6) 0 N/A All set-ups FALSE 0 Uint16
9-90 Changed Parameters (1) 0 N/A All set-ups FALSE 0 Uint16
9-91 Changed Parameters (2) 0 N/A All set-ups FALSE 0 Uint16
9-92 Changed Parameters (3) 0 N/A All set-ups FALSE 0 Uint16
9-93 Changed Parameters (4) 0 N/A All set-ups FALSE 0 Uint16
9-94 Changed Parameters (5) 0 N/A All set-ups FALSE 0 Uint16
9-99 Profibus Revision Counter 0 N/A All set-ups TRUE 0 Uint16
5.3.11 13-** Smart Logic
Par-
ameter # Parameter description Default value 4 set-up Change during
operation
Conversion
index
Type
13-0* SLC Settings
13-00 SL Controller Mode ExpressionLimit 2 set-ups TRUE – Uint8
13-01 Start Event ExpressionLimit 2 set-ups TRUE – Uint8
13-02 Stop Event ExpressionLimit 2 set-ups TRUE – Uint8
13-03 Reset SLC
[0] Do not reset
SLC All set-ups TRUE – Uint8
13-1* Comparators
13-10 Comparator Operand ExpressionLimit 2 set-ups TRUE – Uint8
13-11 Comparator Operator ExpressionLimit 2 set-ups TRUE – Uint8
13-12 Comparator Value ExpressionLimit 2 set-ups TRUE -3 Int32
13-1* RS Flip Flops
13-15 RS-FF Operand S ExpressionLimit 2 set-ups TRUE – Uint8
13-16 RS-FF Operand R ExpressionLimit 2 set-ups TRUE – Uint8
13-2* Timers
13-20 SL Controller Timer ExpressionLimit 1 set-up TRUE -3 TimD
13-4* Logic Rules
13-40 Logic Rule Boolean 1 ExpressionLimit 2 set-ups TRUE – Uint8
13-41 Logic Rule Operator 1 ExpressionLimit 2 set-ups TRUE – Uint8
13-42 Logic Rule Boolean 2 ExpressionLimit 2 set-ups TRUE – Uint8
13-43 Logic Rule Operator 2 ExpressionLimit 2 set-ups TRUE – Uint8
13-44 Logic Rule Boolean 3 ExpressionLimit 2 set-ups TRUE – Uint8
13-5* States
13-51 SL Controller Event ExpressionLimit 2 set-ups TRUE – Uint8
13-52 SL Controller Action ExpressionLimit 2 set-ups TRUE – Uint8
Programming Operating Guide
MG04F402 Danfoss A/S © 05/2016 All rights reserved. 53
5 5