Danfoss vlt fcd 302, Operating Manual, Page: 47 / 84

5.3.4 3-** Reference/Ramps
Par-
ameter # Parameter description Default value 4 set-up Change during
operation
Conversion
index
Type
3-0* Reference Limits
3-00 Reference Range ExpressionLimit All set-ups TRUE – Uint8
3-01 Reference/Feedback Unit ExpressionLimit All set-ups TRUE – Uint8
3-02 Minimum/Offset Reference ExpressionLimit All set-ups TRUE -3 Int32
3-03 Maximum Reference ExpressionLimit All set-ups TRUE -3 Int32
3-04 Reference Function [0] Sum All set-ups TRUE – Uint8
3-05 On Reference Window ExpressionLimit All set-ups TRUE -3 Int32
3-06 Minimum Position
-100000 Custom-
ReadoutUnit2 All set-ups FALSE 0 Int32
3-07 Maximum Position
100000 CustomRea-
doutUnit2 All set-ups FALSE 0 Int32
3-08 On Target Window
5 CustomRea-
doutUnit2 All set-ups TRUE 0 Int32
3-09 On Target Time 1 ms All set-ups TRUE -3 Uint16
3-1* References
3-10 Preset Reference 0 % All set-ups TRUE -2 Int16
3-11 Jog Speed [Hz] ExpressionLimit All set-ups TRUE -1 Uint16
3-12 Catch up/slow Down Value 0 % All set-ups TRUE -2 Int16
3-13 Reference Site
[0] Linked to
Hand / Auto All set-ups TRUE – Uint8
3-14 Preset Relative Reference 0 % All set-ups TRUE -2 Int32
3-15 Reference Resource 1 ExpressionLimit All set-ups TRUE – Uint8
3-16 Reference Resource 2 ExpressionLimit All set-ups TRUE – Uint8
3-17 Reference Resource 3 ExpressionLimit All set-ups TRUE – Uint8
3-18 Relative Scaling Reference Resource [0] No function All set-ups TRUE – Uint8
3-19 Jog Speed [RPM] ExpressionLimit All set-ups TRUE 67 Uint16
3-2* References II
3-20 Preset Target
0 CustomRea-
doutUnit2 All set-ups TRUE 0 Int32
3-21 Touch Target
0 CustomRea-
doutUnit2 All set-ups TRUE 0 Int32
3-22 Master Scale Numerator 1 N/A All set-ups TRUE 0 Int32
3-23 Master Scale Denominator 1 N/A All set-ups TRUE 0 Int32
3-24 Master Lowpass Filter Time 20 ms All set-ups TRUE -4 Uint16
3-25 Master Bus Resolution 65536 N/A All set-ups FALSE 0 Uint32
3-26 Master Offset
0 CustomRea-
doutUnit2 All set-ups TRUE 0 Int32
3-4* Ramp 1
3-40 Ramp 1 Type [0] Linear All set-ups TRUE – Uint8
3-41 Ramp 1 Ramp Up Time ExpressionLimit All set-ups TRUE -2 Uint32
3-42 Ramp 1 Ramp Down Time ExpressionLimit All set-ups TRUE -2 Uint32
3-45 Ramp 1 S-ramp Ratio at Accel. Start 50 % All set-ups TRUE 0 Uint8
3-46 Ramp 1 S-ramp Ratio at Accel. End 50 % All set-ups TRUE 0 Uint8
3-47 Ramp 1 S-ramp Ratio at Decel. Start 50 % All set-ups TRUE 0 Uint8
3-48 Ramp 1 S-ramp Ratio at Decel. End 50 % All set-ups TRUE 0 Uint8
3-5* Ramp 2
3-50 Ramp 2 Type [0] Linear All set-ups TRUE – Uint8
3-51 Ramp 2 Ramp Up Time ExpressionLimit All set-ups TRUE -2 Uint32
3-52 Ramp 2 Ramp Down Time ExpressionLimit All set-ups TRUE -2 Uint32
3-55 Ramp 2 S-ramp Ratio at Accel. Start 50 % All set-ups TRUE 0 Uint8
Programming Operating Guide
MG04F402 Danfoss A/S © 05/2016 All rights reserved. 45
5 5