Danfoss VLT Ea4, Operating Manual

Page: 43 / 76

•
•
•
Status
799RPM 7.83A 36.4kW
0.000
53.2%
1(1)
Auto
Hand
Off
Remote
Local
Ramping
Stop
Running
Jogging
.
.
.
Standby
e30bb037.13
1
2
3
Illustration 24: Status Display
1 See 6.8.2 Status Messages - Operating Mode .
2 See 6.8.3 Status Messages - Reference Site .
3 See 6.8.4 Status Messages - Operation Status .
6.8.2 Status Messages - Operating Mode
Table 15: Operating Mode
Operating
mode Description
Auto The drive requires external commands to execute functions. The start/stop commands are sent via the control
terminals and/or the serial communication.
Hand The navigation keys on the LCP can be used to control the drive. Stop commands, reset, reversing, DC brake,
and other signals applied to the control terminals override local control.
Off The drive does not react to any control signal until [Auto On] or [Hand On] is pressed.
6.8.3 Status Messages - Reference Site
Table 16: Reference Site
Reference site Description
Remote The speed reference is given from:
External signals.
Serial communication.
Internal preset references.
Local The drive uses reference values from the LCP.
6.8.4 Status Messages - Operation Status
Table 17: Operation Status
Operation
status Description
AC brake
AC brake was selected in parameter 2-10 Brake Function . The AC brake overmagnetizes the motor to achieve a
controlled slow down.
AMA finish
OK Automatic motor adaptation (AMA) was carried out successfully.
AQ434333248451en-000101 / 130R1286 | 43 Danfoss A/S © 2023.01
Operating the Drive
VLT Ea4 Parallel Drive Modules
Operating Guide