0-31 Min Value of User-defined Readout
Range:
Function:
Cubic units the minimum
value will be 0.
0-32 Custom Readout Max Value
Range:
Function:
100.00 Custom-
ReadoutUnit
*
[ par. 0-31 -
999999.99
CustomRea-
doutUnit]
This parameter sets the max
value to be shown when
the speed of the motor has
reached the set value for
4-13 Motor Speed High Limit
[RPM]
or
4-14 Motor Speed
High Limit [Hz]
(depends on
setting in
0-02 Motor Speed
Unit
).
6.2.3 0-4* LCP Keypad
Enable and disable individual keys on the LCP keypad.
0-40 [Hand on] Key on LCP
Option:
Function:
If
0-40 [Hand on] Key on LCP
is included in the
Quick Menu, then define the password in
0-65 Quick Menu Password
.
[0]
Disabled Prevents accidental start of the frequency
converter in Hand mode.
[1]
*
Enabled Prevents unauthorised start in Hand mode.
0-41 [Off] Key on LCP
Option: Function:
Options are the same as in
0-40 [Hand on] Key on LCP
.
0-42 [Auto on] Key on LCP
Option: Function:
Options are the same as in
0-40 [Hand on] Key on LCP
.
0-43 [Reset] Key on LCP
Option: Function:
Options are the same as in
0-40 [Hand on] Key on LCP
.
6.2.4 0-5* Copy/Save
Copy parameter settings between set-ups and to/from the
LCP.
0-50 LCP Copy
Option:
Function:
[0]
*
No copy
[1]
All to LCP
Copies all parameters in all set-ups from
the frequency converter memory to the
LCP memory.
0-50 LCP Copy
Option:
Function:
[2]
All from LCP
Copies all parameters in all set-ups from
the LCP memory to the frequency
converter memory.
[3]
Size indep. from
LCP
Copies only the parameters that are
independent of the motor size.
0-51 Set-up Copy
Option:
Function:
[0] No copy
[1] Copy to set-up 1 Copies all parameters in the present edit
set-up (defined in par. 0-11 Edit Set-up) to
Set-up 1. Likewise, select the option
corresponding to the other set-up(s).
[2] Copy to set-up 2
[3] Copy to set-up 3
[4] Copy to set-up 4
[9] Copy to all
Copies the parameters in the present set-
up over to each of the set-ups 1 to 4.
6.2.5 0-6* Password
Define password access to menus.
0-60 Main Menu Password
Option: Function:
Define the password for access to the Main Menu via
the [Main Menu] key. If
0-61 Access to Main Menu w/o
Password
is set to
[0] Full access
, this parameter will be
ignored.
0-61 Access to Main Menu w/o Password
Option:
Function:
[0]
*
Full access Disables the password defined in
0-60 Main
Menu Password
.
[1]
Read only Prevents unauthorised editing of Main Menu
parameters.
[2]
No access Prevents unauthorised viewing and editing of
Main Menu parameters.
NOTE
If
[0] Full access
is selected,
0-60 Main Menu Password
,
0-65 Quick Menu Password
and
0-66 Access to Quick Menu
w/o Password
are ignored.
0-65 Quick Menu Password
Option: Function:
Define the password for access to the Quick Menu via
the [Quick Menu] key. If
0-66 Access to Quick Menu w/o
Password
is set to
[0] Full access
, this parameter will be
ignored.
Parameter Descriptions
Operating Instructions VLT
®
CDS302 and CDS303
50
MG34M302 - VLT
®
is a registered Danfoss trademark/Commercial Compressor
6
6