Danfoss VLT Brook Crompton Motor FCM 300, Design Manual

Page: 96 / 102

Parameter
No. Function Range/number of settings/value Factory setting
Data
type
Conv.
index
600 Operating data: Operating hours 0-130,000.0 hours 5 0
601 Operating data: Hours run 0-130,000.0 hours 7 73
603 Operating data: Number of power-up's 0-9999 7 73
604 Operating data: Number of overtemp. 0-9999 6 0
605 Operating data: Number of overvoltages 0-9999 6 0
615 Fault log, read-out: Error code Index XX-XXX 6 0
616 Fault log, read-out: Time Index XX-XXX 5 0
617 Fault log, read-out: Value Index XX-XXX 7 -1
619 Reset of hours-run counter No reset/reset No reset 3 0
620 Operation mode 3 Normal function 5 0
621 Nameplate: FC motor type Depends on unit 5 0
624 Nameplate: Software version no. Depends on unit 9 0
625 LCP version Depends on unit 9 0
626 Nameplate: Database identification no. Depends on unit 9 0
628 Nameplate: Application option type 9 -2
630 Nameplate: Communication option type 9 0
632 BMC software identification 9 0
633 Motor database identification 9 0
634 Unit identification for communication 9 0
635 Software part No. 9 0
678 Configure Control Card Depends on unit 5 0
Table 4.18 Functions to Programme, to Control and to Monitor via Bus (PROFIBUS) or by PC.
Conversion index:
This number refers to a conversion figure to be used when
writing or reading via serial communication with a
frequency converter.
See
3.6.4 Databytes in 3.6.1 Serial Bus
Data type :
Data type shows the type and length of the telegram.
Data type Description
3 Integer 16
4 Integer 32
5 Unsigned 8
6 Unsigned 16
7 Unsigned 32
9 Text string
Table 4.19
All about FCM 300
VLT
®
DriveMotor FCM Series
94 MG03BA02 - VLT
®
is a registered Danfoss trademark
4 4