1.4.3 Ordering
Take a copy of the ordering form, see
.
Fill in and post or fax your order to the nearest branch
office of the Danfoss sales organisation. On the basis of
your order, the FCM 300 Series motor is given a type code.
The ordering form for the basic unit must always be
completed. When the type code is written, always state the
characters of the basic string (1-34). Together with the
order confirmation the customer receives an 8-figure code
number to be used when reordering.
Danfoss PC software for serial communication, MCT 10
All FCM 300 Series units have an RS 485 port as standard,
which enables them to communicate e.g. with a PC. A
programme entitled MCT 10 is available for this purpose
(see
Ordering numbers, MCT 10
Use code number 130B1000 for ordering the CD
containing MCT 10 Set-up Software.
Accessories for the FC motor
A Local Operation Pad (LOP) for local set point and start/
stop is available for the FC motor. The LOP is IP 65
enclosed. A Local Control Panel (LCP 2) which makes up a
complete interface for operation, programming and
monitoring of the FC motor is also available.
Ordering numbers, accessories
Local Operation Pad incl. cable (LOP)
175N0128
Local Control Panel (LCP 2)
175N0131
Remote mounting kit (LCP 2)
175N0160
Plug kit (LCP 2)
175N2545
Cable for plug kit (LCP 2)
175N0162
Cable (direct mounting) (LCP 2)
175N0165
Service plug kit (LCP 2)
175N2546
Potentiometer option
177N0011
Table 1.5
1.4.4 PC Software Tools
PC Software - MCT 10
All frequency converters are equipped with a serial
communication port. Danfoss provides a PC tool for
communication between PC and frequency converter, VLT
Motion Control Tool MCT 10 Set-up Software.
MCT 10 Set-up Software
MCT 10 has been designed as an easy to use interactive
tool for setting parameters in our frequency converters.
The MCT 10 Set-up Software will be useful for:
•
Planning a communication network off-line. MCT
10 contains a complete frequency converter
database
•
Commissioning frequency converters on line
•
Saving settings for all frequency converters
•
Replacing a drive in a network
•
Expanding an existing network
•
Future developed drives will be supported
The MCT 10 Set-up Software Modules
The following modules are included in the software
package:
175NA162.10
Illustration 1.4
Introduction
VLT
®
DriveMotor FCM Series
MG03BA02 - VLT
®
is a registered Danfoss trademark
9
1
1
Summary of Contents for VLT Brook Crompton Motor FCM 300
Page 2: ......
Page 37: ...Programming VLT DriveMotor FCM Series MG03BA02 VLT is a registered Danfoss trademark 35 3 3...
Page 101: ...Index VLT DriveMotor FCM Series MG03BA02 VLT is a registered Danfoss trademark 99...
Page 102: ...www danfoss com drives MG03BA02 175R0087 MG03BA02 Rev 2011 12 22...
