Danfoss VLT AQUA Drive FC 200, Operating Instructions Manual

Page: 4 / 91

Contents
1 Introduction
4
1.1 Purpose of the Manual
5
1.2 Additional Resources
6
1.3 Product Overview
6
1.4 Internal Frequency Converter Controller Functions
6
1.5 Frame Sizes and Power Ratings
7
2 Installation
8
2.1 Installation Site Check List
8
2.2 Frequency Converter and Motor Pre-installation Check List
8
2.3 Mechanical Installation
8
2.3.1 Cooling 8
2.3.2 Lifting 9
2.3.3 Mounting 9
2.3.4 Tightening Torques 9
2.4 Electrical Installation 10
2.4.1 Requirements 12
2.4.2 Earth (Grounding) Requirements 12
2.4.2.1 Leakage Current (>3,5mA) 13
2.4.2.2 Grounding Using Shielded Cable 13
2.4.2.3 Grounding Using Conduit 14
2.4.3 Motor Connection 14
2.4.4 AC Mains Connection 15
2.4.5 Control Wiring 15
2.4.5.1 Access 15
2.4.5.2 Control Terminal Types 16
2.4.5.3 Wiring to Control Terminals 17
2.4.5.4 Using Screened Control Cables 18
2.4.5.5 Control Terminal Functions 18
2.4.5.6 Jumper Terminals 12 and 27 18
2.4.5.7 Terminal 53 and 54 Switches 18
2.4.5.8 Terminal 37 19
2.4.5.9 Mechanical Brake Control 22
2.4.6 Serial Communication 22
3 Start Up and Functional Testing
23
3.1 Pre-start
23
3.1.1 Safety Inspection 23
3.1.2 Start Up Check List 24
3.2 Applying Power to the Frequency Converter 25
Contents
VLT
®
AQUA Drive
Operating Instructions
MG.20.M8.02 - VLT
®
is a registered Danfoss trademark 1