![background image](http://html1.mh-extra.com/html/danfoss/vlt-6002-6011/vlt-6002-6011_installation-operation-and-maintenance-manual_3482230025.webp)
25
50.0Hz
SETUP
1
REF% CURR.A POW. kW
AUTO REMOTE RUN
Display Mode II
Navigation Between
Display Modes
With remote
controlled reference
40.0Hz
SETUP
1
80% 7.8A 5.9kW
AUTO REMOTE RUN
40.0Hz
SETUP
1
REF% CURR.A POW. kW
AUTO REMOTE RUN
▲ ▲ ▲ ▲ ▲
Keep DISPLAY
MODE key down
Display Mode I
Display Mode IV
Display Mode III
SETUP
1
FREQUENCY
AUTO REMOTE
RUNNING
40.0Hz
With local reference
SETUP
1
USE +/- 56Hz
HAND LOCAL
RAMPING
40.0Hz
0 ----
60
▲▲▲▲▲
Display Mode III:
This display mode is shown when the drive is in Display Mode II and the
Display Mode key is pressed and held. In the first line, a description of
the three top meters in Display Mode II is shown. The other lines are
unchanged. When the key is released, Display Mode II is again shown.
Display Mode IV:
This display mode is available when local reference is selected. In this
display mode, the speed reference is increased or decreased via +/- keys.
The first line shows the present speed reference. The second line
shows the present drive output frequency. The third line show a bar
graph of the relative value of the present drive output frequency in
relation to the maximum frequency.
▼ ▼ ▼ ▼ ▼
Release DISPLAY
MODE key
SETUP
1
USE +/- 56Hz
HAND
LOCAL
RAMPING
40Hz
0 ----
-60
With local reference
With local/remote
reference