Danfoss Vacon NXP Series, Operating Manual, Page: 6 / 174

9 Commissioning 116
9.1 Safety Checks before Starting the Commissioning 116
9.2 Commissioning the AC Drive 117
9.3 Measuring the Cable and Motor Insulation 118
9.3.1 Insulation Checks of the Motor Cable 118
9.3.2 Insulation Checks of the Mains Cable 119
9.3.3 Insulation Checks of the Motor 119
9.4 Checks after Commissioning 120
9.4.1 Testing the AC Drive after Commissioning 120
9.4.2 RUN Test without Load 120
9.4.3 Start-up Test 121
9.4.4 Identification Run 121
10 Maintenance 122
10.1 Maintenance Schedule 122
10.2 Reforming the Capacitors 122
11 Fault Tracing 123
11.1 General Information on Fault Tracing 123
11.2 Resetting a Fault 123
11.3 Creating Service Info File 124
12 Specifications 125
12.1 Weights of the AC Drive 125
12.2 Dimensions 125
12.2.1 List of Dimension Information 125
12.2.2 Wall-mounted 126
12.2.3 Flange mounting 130
12.2.4 Standalone 136
12.3 Cable and Fuse Sizes 137
12.3.1 List of Cable and Fuse Size Information 137
12.3.2 Cable and Fuse Sizes for 208–240 V and 380–500 V, FR4 to FR9 137
12.3.3 Cable and Fuse Sizes for 208–240 V and 380–500 V, FR4 to FR9, North America 138
12.3.4 Cable and Fuse Sizes for 525–690 V, FR6 to FR9 140
12.3.5 Cable and Fuse Sizes for 525–690 V (UL Rating 600 V), FR6 to FR9, North America 141
12.3.6 Cable and Fuse Sizes for 380–500 V, FR10 to FR11 142
12.3.7 Cable and Fuse Sizes for 380–500 V, FR10 to FR11, North America 142
12.3.8 Cable and Fuse Sizes for 525–690 V, FR10 to FR11 143
12.3.9 Cable and Fuse Sizes for 525–690 V (UL Rating 600 V), FR10 to FR11, North America 144
12.4 Cable Stripping Lengths 144
12.5 Tightening Torques for Cover Screws 146
12.6 Tightening Torques of the Terminals 146
Contents Operating guide | VACON® NXS/NXP Air-cooled
DPD00910G 6 | Danfoss A/S © 2018.06