manualshive.com logo in svg

Danfoss Vacon NXP Series, Operating Manual, Page: 62 / 174

Share
Download
Danfoss Vacon NXP Series Operating Manual Download Page 62

e30bg088.10

5.

Connect the cables. See the correct tightening torques in 

12.6 Tightening Torques of the Terminals

.

•

Connect the phase conductors of the mains cable and of the motor cable, and the conductors of the brake resistor cable into
the correct terminals.

6.

Make sure to connect the grounding conductor to the motor and the terminals that are identified with the grounding symbol.

•

If a double grounding is necessary, use the grounding terminal below the drive. Use an M5 screw and tighten it to 2.0 Nm or
17.7 lb-in.

e30bg093.10

7.

Attach the cable cover 

12.5 Tightening Torques for Cover Screws

. Attach the grounding clamps for control cable with 3 pieces of

M4x16 screws delivered in the accessories bag. Use these clamps to ground the control cables.

Electrical Installation

Operating guide | VACON® NXS/NXP Air-cooled

DPD00910G

62 | Danfoss A/S © 

2018.06

Summary of Contents for Vacon NXP Series















































































































































































Reviews:

No comments