manualshive.com logo in svg

Danfoss Vacon NXP Series, Operating Manual, Page: 60 / 174

Share
Download
Danfoss Vacon NXP Series Operating Manual Download Page 60

e30bg070.10

Illustration 22:  FR4-FR6

8.

Attach the cover of the drive. For the tightening torques of the screws, see 

12.5 Tightening Torques for Cover Screws

. Make sure

that the control cables or the cables of the AC drive are not caught between the frame and the cable cover.

6.5.3 Installing the Cables, FR7

Context:

Follow these instructions to install the cables and cable accessories.'

For information on how to comply with the UL regulations in cable installation, see 

6.1.2 UL Standards on Cabling

.

If it is necessary to connect an external brake resistor, see VACON

®

 Brake Resistor Manual. See also 

8.7.8.2 Setting the Internal Brake

Resistor Connection

.

Prerequisites:

Make sure that the delivery contains all necessary components. For the installation, the contents of the accessories bag is needed, see

4.1 Checking the Delivery

.

Open the covers according to instructions in 

6.4.4 Get Access and Locate the Terminals for FR7

.

Electrical Installation

Operating guide | VACON® NXS/NXP Air-cooled

DPD00910G

60 | Danfoss A/S © 

2018.06

Summary of Contents for Vacon NXP Series















































































































































































Reviews:

No comments