Service Monitor User Manual
Danfoss Turbocor Compressors Inc.
37
ECD-00007M Rev. 1
To view the “Chiller Control” window, select “Window”
→
“Chiller Control” from the menu bar, or click on the
“Chiller Control” icon located below the menu bar. Table 14
provides details about the chiller controller parameters.
NOTE:
The measurement unit (metric/imperial) displayed depends
on the measurement unit previously set. To verify or change
the measurement unit, refer to section 6.3 "Compressor
Control" on page 23.
IMPORTANT:
To change a parameter setting, double-click the variable
field, scroll or type in the new setting, and
press Enter
. It is
important to press Enter as this causes the user input to be
validated.
Figure 28 Chiller Control Form