User Guide
MES 1003 WMS
Doc no. 100837-MAN – Rev. E1 – Rev. date 2022-10
© Danfoss IXA A/S | Page 9
2.1.4.
Navigation Keys (C)
Navigation keys are used for editing parameters, moving the display cursor, and selecting display views.
Illustration 6: Navigation Keys
Key
Function
Back
Return/deselect
Go to the nearest higher level view/Menu. The top level view is the Status view.
Cancel
Cancels selection
Cancels the last change or command as long as the display mode has not changed.
OK
Enter/select
Use to access parameter groups or to enable a selection.
Navigation
keys
Use the 4 navigation keys to move between items in the menu and toggle between Status views.
▲
Arrow up
▼
Arrow down
◄
Arrow left
►
Arrow right
Table 5: Legend to Illustration 6: Navigation Keys
2.1.5.
Indicator Lights (LEDs)
If certain threshold values are exceeded, the alarm and/or warning LED light up. A status and alarm text appears on the
control panel. At the same time, the back light is on.
Illustration 7: Indicator Lights (LEDs)
LED
Function
On - green LED
Power on
Warn - yellow LED
On when a warning is active.
Alarm - red LED
Blinking when an alarm is active.
Table 6: Legend to Illustration 7: Indicator Lights (LEDs)
