Danfoss HC6000, User Instructions

Page: 8 / 72

8
U
ser Instruc
tions
GB
Cool: Thermostat operates as cooling thermostat only, starting
the cooling when the room temperature rises to above the
wanted temperature.
Off : Both heating and cooling are turned off . (There is no frost
protection in “Off ” mode.)
Selecting the thermostat fan operating mode
using the FAN button
The operating mode of the thermostat fan output can be changed
by pressing the
FAN button. The available modes are as follows:
Auto: The fan runs whenever there is a
demand for either heating or cooling. A
solid bar will show in the display adjacent
to the label
FAN AUTO and a fan symbol
will be shown when the fan is running.
On: The fan runs continuously. A solid bar
will show in the display adjacent to the
label
FAN ON , in addition, the fan symbol
will also be shown to indicate that the fan
is running.
Smart-fan : The fan runs continuously
during events 1-4 but reverts to Auto
during event 4-1. A fl ashing solid bar will
be shown adjacent to the label
FAN ON
and the fan symbol will also be shown.
Temp. changes to programmed temperatures
Press either or to view programmed
temperatures. If Off is selected this option
does not operate.
FAN AUTO
FAN ON