10
U
ser Instruc
tions
GB
1. To enter
THERMOSTAT
mode press both
and buttons together and hold down for
2 seconds to enter
WEEKEND
into
WEEKDAY
override.
2. Press both and buttons together for a
second time and hold down for 2 seconds
to enter
THERMOSTAT
mode. The default
setting is heat only.
3. Once in
THERMOSTAT
mode it is possible to select the
required heating and cooling temperatures and the thermostat
operating mode, see below for setting details.
4. Use or buttons to select required heating temperature.
5. Press
SELECT
button to select
COOL
mode
then use or
buttons to select required
cooling temperature.
6. Press
SELECT
button twice again to return
to
AUTO
mode. The thermostat will now
operate heating and cooling to maintain the
selected temperatures.
7. Should Heat only or Cool only be required, use
SELECT
button
to select required service.
8. Should system
OFF
be required, use
SELECT
button to select “Off ”.
Please note:
Frost protection is not provided in OFF mode.
THERMOSTAT
mode can be cancelled at any time by pressing
both and
buttons together and holding down for 2 seconds.
This will return the unit to normal running mode.
Summary of Contents for HC6000
Page 70: ...70...
Page 71: ...71...
Page 72: ...72 Part No 33087v03 07 07 www danfoss com BusinessAreas Heating...