4
U
ser Instruc
tions
GB
Before programming the thermostat it is recommended that
the user preferences as regards clock display and temperature
scale are set.
Clock Display
Press both
SELECT
and buttons and hold for 2 seconds to
change display between AM/PM and 24 hour clock. Repeat to
return to original setting.
Temperature Scale
To select between Centigrade and Fahrenheit temperature
displays please follow the following steps:
1. Press
SELECT
and buttons for 2 seconds
to enter temperature display mode.
2. Press
SELECT
and
FAN
buttons for 2
seconds to change between Centigrade and
Fahrenheit display.
3. Press
SELECT
and buttons for 2 seconds
to change display back to time display mode
prior to programming.
Resetting The Unit
Before beginning the programming of the unit please press the
reset button using a non-metallic object (e.g. pencil/matchstick).
During programming if no buttons are pressed for two minutes
the unit will automatically go back to run mode. All changes
made will be saved.
User Preferences
+
SELECT
+
SELECT
+
SELECT
FAN
Summary of Contents for HC6000
Page 70: ...70...
Page 71: ...71...
Page 72: ...72 Part No 33087v03 07 07 www danfoss com BusinessAreas Heating...
