![background image](http://html1.mh-extra.com/html/danfoss/hc6000/hc6000_user-instructions_3599053007.webp)
7
Setting the time and temperatures events for
Days 6-7.
1. Press
PROG
repeatedly until
6 7
appears at
the bottom of the display.
2. Press
+
or
–
buttons to adjust event time.
3. Press
PROG
to advance to temperature
setting.
4. Press
or
buttons to adjust heating
temperature.
5. Press
+
or
–
button to select required cooling
temperature.
OPTIONAL: If heating is not required, “Off ” can be selected below 5°C.
If cooling is not required, “Off ” can be selected above 37°C.
Press
PROG
button to move onto event 2 programming and
follow the steps above to programme event 2, 3 and 4.
Daily Use instructions
The operating mode of the thermostat can
be changed by pressing the
SELECT
button.
These thermostats are used in 4-pipe system
which allow heating or cooling to operate
all year round. The available modes are as follows:
Auto:
The thermostat switches automatically between heating
and cooling to maintain the programmed temperatures.
Heat:
Thermostat operates as heating thermostat only, starting
the heating when the room temperature falls to below the
wanted temperature.
U
ser Instruc
tions
GB
or
+
-
AUTO
HEAT
COOL
OFF
Summary of Contents for HC6000
Page 70: ...70...
Page 71: ...71...
Page 72: ...72 Part No 33087v03 07 07 www danfoss com BusinessAreas Heating...