background image

Operating voltage

GLT80TDC is designed to operate in a wide range 
of DC voltages, supplied either by a battery or by 
any other kind of filtered DC power supply. 

DC VOLTAGE SUPPLY ALLOWED: 10V to 42.4V

• Standard (Default):  

From the value of the applied voltage, the 
electronic driver automatically decides the rated 
voltage range of the supply. Three possible 
ranges are considered: 

12 to 14V: actual voltage is below 17V 
24 to 28V: actual voltage is within 17 and 
33V 36 to 42V: actual voltage is within 33 and 
42.4V

• Special (programming option): 

The compressor can be powered by a variable DC 
source as, for instance, a photovoltaic panel, in 
which the output voltage strongly depends on 
the intensity of sunlight radiation. In these special 
cases the driver should be programmed with 
rated, minimum and maximum voltages. These 
values should be within the allowable DC voltage 
power supply (10 V to 42.4V). 

Rated voltage and voltage limits are programmed 
by the appliance manufacturer by means of a PC 
connected through the serial port to the driver 
Serial Port Interface, using the FxC programming 
package provided by the manufacturer upon 
request.

Functional modes

9

FRCC.PC.041.A1.02

Summary of Contents for GLT80TDC





















Reviews: