130BT115.1
0
Illustration 2.12: Step 6: Choose parameter 6-50
Terminal 42 Output
.
Press [OK].
130BT116.1
0
Illustration 2.13: Step 7: Use the up/down navigation keys to select
between the different choices. Press [OK].
The Function Setup parameters are grouped in the following way:
Q3-1 General Settings
Q3-10 Adv. Motor Settings
Q3-11 Analog Output
Q3-12 Clock Settings
Q3-13 Display Settings
1-90 Motor Thermal Protection
6-50 Terminal 42 Output
0-70 Set date and time
0-20 Display Line 1.1 Small
1-93 Thermistor Source
6-51 Terminal 42 Output max.
scale
0-71 Date format
0-21 Display Line 1.2 Small
1-29 Automatic Motor Adaption
6-52 Terminal 42 Output min. scale 0-72 Time format
0-22 Display Line 1.3 Small
14-01 Switching Frequency
0-74 DST/Summertime
0-23 Display Line 2 large
4-53 Warning Speed High
0-76 DST/Summertime start
0-24 Display Line 3 large
0-77 DST/Summertime end
0-37 Display Text 1
0-38 Display Text 2
0-39 Display Text 3
Q3-2 Open Loop Settings
Q3-20 Digital Reference
Q3-21 Analog Reference
3-02 Minimum reference
3-02 Minimum reference
3-03 Maximum reference
3-03 Maximum reference
3-10 Preset reference
6-10 Terminal 53 low voltage
5-13 Terminal 29 digital input
6-11 Terminal 53 high voltage
5-14 Terminal 32 digital input
6-12 Terminal 53 Low Current
5-15 Terminal 33 digital input
6-13 Terminal 53 High Current
6-14 Terminal 53 low ref/feedb. value
6-15 Terminal 53 high ref/feedb. value
VLT
®
HVAC Drive Programming Guide
2. How to Programme
MG.11.C5.02 - VLT
®
is a registered Danfoss trademark
17
2